Wireless Mesh Network Setting

Mesh network uses wireless media to communicate with other APs, like the Ethernet does. To do this, you must set these APs in the same channel with the same Mesh ID. The APs should be under AP+MESH/MESH mode.

---

Mesh ID:	">
Encryption:	" onChange="checkState(wlan_idx)" > None WPA2 (AES)
Pre-Shared Key Format:	"> Passphrase Hex (64 characters)
Pre-Shared Key:	" size="40" maxlength="64" value=<% getInfo("meshPskValue");%>>